Hi. I just got the reciever GB IP 4K with dual tuner and i cannot configure my EMP 16/1 diseqc swich on my T90 Torodial antenna.
I have latest Teamblue image i did try OpenATV 6.4 but its the same. I cannot get picture, reciver does not operate well with diseqc 1.1 protocol.
I did try tuner A and B, no luck. I try Increase voltage option, no luck.
My previous box Octagon sf8008 works just fine with this diseqc.
This configuration works with my previous box.
Anyone to help? My qiseqc is similar to this one in this thread. My is only 16/1 from same manufacture.
EMP 8/1 and 16/1 diseqc switch dont work with this box.
Did you change YOUR old setting definition to a maybe new needed definition, like he did (and now working for him)?
please check the terminal --> grep Nims /etc/enigma2/settings > /tmp/Nim.settings
and from /tmp/ append the file Nim.settings here ...
I change diseqc from EMP 16/1 to Falcom 16/1. Box is working fine with Falcom diseqc.
Here are nims, and please tell me what to change to get EMP 16/1 working:
config.Nims.0.dvbs.advanced.lnb.1.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.1.longitude=18.0
config.Nims.0.dvbs.advanced.lnb.1.powerMeasurement=false
config.Nims.0.dvbs.advanced.lnb.1.uncommittedDiseqcCommand=1
config.Nims.0.dvbs.advanced.lnb.2.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.2.uncommittedDiseqcCommand=2
config.Nims.0.dvbs.advanced.lnb.3.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.3.powerMeasurement=false
config.Nims.0.dvbs.advanced.lnb.3.uncommittedDiseqcCommand=3
config.Nims.0.dvbs.advanced.lnb.5.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.5.uncommittedDiseqcCommand=5
config.Nims.0.dvbs.advanced.lnb.6.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.6.uncommittedDiseqcCommand=6
config.Nims.0.dvbs.advanced.lnb.7.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.7.powerMeasurement=false
config.Nims.0.dvbs.advanced.lnb.7.uncommittedDiseqcCommand=7
config.Nims.0.dvbs.advanced.lnb.9.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.9.uncommittedDiseqcCommand=9
config.Nims.0.dvbs.advanced.lnb.10.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.10.uncommittedDiseqcCommand=10
config.Nims.0.dvbs.advanced.lnb.11.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.11.uncommittedDiseqcCommand=11
config.Nims.0.dvbs.advanced.lnb.12.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.12.uncommittedDiseqcCommand=12
config.Nims.0.dvbs.advanced.lnb.13.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.13.uncommittedDiseqcCommand=13
config.Nims.0.dvbs.advanced.lnb.14.diseqcMode=1_1
config.Nims.0.dvbs.advanced.lnb.14.powerMeasurement=false
config.Nims.0.dvbs.advanced.lnb.14.uncommittedDiseqcCommand=14
config.Nims.0.dvbs.advanced.sat.19.lnb=12
config.Nims.0.dvbs.advanced.sat.48.lnb=11
config.Nims.0.dvbs.advanced.sat.90.lnb=10
config.Nims.0.dvbs.advanced.sat.130.lnb=9
config.Nims.0.dvbs.advanced.sat.160.lnb=1
config.Nims.0.dvbs.advanced.sat.192.lnb=2
config.Nims.0.dvbs.advanced.sat.235.lnb=3
config.Nims.0.dvbs.advanced.sat.282.lnb=5
config.Nims.0.dvbs.advanced.sat.330.lnb=6
config.Nims.0.dvbs.advanced.sat.390.lnb=7
config.Nims.0.dvbs.advanced.sat.3550.lnb=14
config.Nims.0.dvbs.advanced.sat.3592.lnb=13
config.Nims.0.dvbs.advanced.sats=3550
config.Nims.0.dvbs.configMode=advanced
config.Nims.0.dvbs.diseqcMode=positioner
config.Nims.0.dvbs.longitude=18.0
config.Nims.1.dvbs.advanced.lnb.1.diseqcMode=1_1
config.Nims.1.dvbs.advanced.lnb.1.latitude=47.767
config.Nims.1.dvbs.advanced.lnb.1.longitude=18.0
config.Nims.1.dvbs.advanced.lnb.1.powerMeasurement=false
config.Nims.1.dvbs.advanced.lnb.1.uncommittedDiseqcCommand=1
config.Nims.1.dvbs.advanced.sat.160.lnb=1
config.Nims.1.dvbs.advanced.sats=160
config.Nims.1.dvbs.diseqcMode=positioner
config.Nims.1.dvbs.latitude=47.767
config.Nims.1.dvbs.longitude=18.0
I have forwarded your request to the image creator
Ok, thank you
Is it maybe a problem of power consumption (EMP =80mA/18V; others =10mA/18V)?
Why is Tuner A (Nims.0) also set to "config.Nims.0.dvbs.diseqcMode=positioner"? Is there USALS activated for Tuner A?
Tuner A is only configured to diseqc 1.1, i dont know why is this 18. Emp 16/1 works on old dreambox, octagon sf8008 but not on this tuner with same configuration. On EMP only works input 1 but not other ports.