Hi all,
I have a problem, I don't know the default root password on teamblue image...
I have tried with usal words: teamblue,dreambox, etc but without success...
Thanks in advance
leon77
Hi all,
I have a problem, I don't know the default root password on teamblue image...
I have tried with usal words: teamblue,dreambox, etc but without success...
Thanks in advance
leon77
you use Telnet Port 23 you need no password
Thanks, but I need the root password for access to web interface, anyway I tried also with telnet, and also here the sistem ask me the root psw. what's the password default for teamblue image?
Fill in for username: root
and leave the field for Password empty.
use telnet and set your password with passwd
then can you use it on ssh or WebIF
So, I tried also empty field, but doesn't work.
For telnet, just for remember that the root password can be changed only when I have logged as root user, in my case I couldn't it
there is no password set with a fresh image, which you can set if necessary, if you want it
login with telnet
user = root
and now can you set your password
passwd
You are accessing the box from your local network.
You are using propper tools for telnet or ftp.
In teamBlue or oATV6.x there are no passwords set by default.
If you cannot access the box the way above written, you have a box preset by a third party.
That's not our fault or an image mistake.
- Ask the one, who setup the box for you.
- Flash new, and do not restore anything.
Here the list telnet command.
telnet> open 192.168.1.20Trying 192.168.1.20...
Connected to 192.168.1.20.
Escape character is '^]'.
Welcome to teamBlue for gb800seplus
teamblue 6.1 gb800seplus
gb800seplus login: root
Password:
Login incorrect
gb800seplus login:
Only to be sure we are all talking about the same - when you are at the point to type the password, you just press enter and nothing else, right? You don't have to press the spacebar first.
What you have to do is the following:
gb800seplus login: root
Password: at this point just press the enter-key, do nothing else, just press the enter-key
If you can't login like this, then you have a password set you neither can't remember, nor haven't set by yourself.
We never build images with an preset password. You have to set this password by your own!
So, if you reset a password with your backups, you'll need to enter the password of your backups.
Please flash a new TB Image without any recovery.
If you use an Image of your reseller who doesn't provide the password, than you have to finde some ways to deleate this password.
are you able to connect to your box using Samba?
Hi,
I just unboxed my Gigablue UE UHD 4K.
The only thing I did was updateing the software via the menu options.
I cannot log in to root, neither with empty password, nor with "buffy" (found that somewhere on the internet)
Wallenstein
Menu, settings, system, network.
You have to set a password there.
Then you can log in with
root
and your password.
Besten Dank!!!!
Den Hinweis habe ich verzweifelt gesucht
Can also be found there:
[HowTo] Beachten beim Einbinden von Shares im Freigabe-Manager