Gibt es für die GB ein Festplattenüberwachungtool das den Gesundheitszustand der Festplatte beobachtet?
Tool für Festplattenüberwachung
-
-
in der konsole ja
~# opkg update && opkg install smartmontools
dann per
~# smartctl -a /dev/sda
beispielsweise die smart daten des gerätes auslesen hier sda ... sdb oder sdc ist auch möglich, je nachem wie die platte erkannt wurde.
-
Danke für den Tipp.
Und wie schalte ich das SMART support dauerhaft ein?Alles anzeigenCode- :~# smartctl -a /dev/sdasmartctl 6.5 2016-05-07 r4318 [mips-linux-4.8.3] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD10JPLX-00MBPT0
- Serial Number: JR1000BNJ5P5DE
- LU WWN Device Id: 5 000cca 8e6dec459
- Firmware Version: 01.01H01
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat Sep 15 14:53:58 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Disabled
- SMART Disabled. Use option -s with argument 'on' to enable it.
- (override with '-T permissive' option)
Gibt es dazu ein Funktion die am Display des Receivers oder am TV eine Fehlermeldung über die HDD ausgibt. -
Die Ausgabe irgendwo in der GUI einzubringen ist sicherlich als Plugin möglich, aber nicht zielführend ... zumal du die SMART Daten deiner Platten nicht gepostet hast ... diese gehören ja auch noch ausgewertet.
-
In der Zwischenzeit habe ich es gefunden wie man Smart aktiviert.
Die defekte Platte habe ich ausserhalb der GB an einem PC überprüft.Dies ist die Auswertung der neuen Festplatte.
~# smartctl -a /dev/sda
Alles anzeigenCode- smartctl 6.5 2016-05-07 r4318 [mips-linux-4.8.3] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD10JPLX-00MBPT0
- Serial Number: JR1000BNJ5P5DE
- LU WWN Device Id: 5 000cca 8e6dec459
- Firmware Version: 01.01H01
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat Sep 15 18:00:56 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 188) minutes.
- SCT capabilities: (0x0035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0007 139 139 033 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 10
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
- 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 96
- 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 22/41)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.