hello, only speak english unfortunately.
i use the openvix image on GIGABLUE UHD TRIO 4K. i have 2 of these boxes. issue is present on both.
The remote is this one: https://github.com/oe-alliance…anding/remotes/gb4/rc.png
I have asked this on the openvix forum but they seem to think it is a driver issue related to gigablue. i have reached out to gigablue previously but could not get it resolved.
I have drawn a red box around 2 buttons on the remote for the trio box
Each of these buttons sends a code from remote to trio box.
The linux kernel receives these codes (the linux command 'dmesg' shows
these when the button is pressed)
I think the linux gigablue drivers does not pass them so that they are available in the UI.
The UI is Openvix which is based on OE Alliance.
The below is a spreadsheet which lists every button on the trio uhd 4k remote control:
https://docs.google.com/spread…ziVPSJ4hYIYP51EOV/pubhtml
In this spreadsheet, you can see that those 2 buttons do not pass on the remote control button code.
I have tried to reflash the gigablue official image to check if the 'subtitle' button works correctly in their image but this has failed.
Does this description of the problem make sense ?