Hi
im Netz entdeckt - ich habs vom DBI (Dreambox Beginner Forum) ist aber bestimmt vom IHAD
Wie der Name schon sagt, ein Tool womit sich nur die benötigten Picons installieren/verwalten lassen.
Es werden nur die Picons installiert und verwaltet die in der Senderliste stehen, andere werden ja eh nicht benötigt.
Multilanguage
Big thanks to following teams for the collaboration
- BQ-Team
- Dream Elite
- UnderWorld
- Anunaki
- Polski by -> Aleksandra Pawlikowska
Big thanks for the tester
By ZebraDem
* Drehrumbum
By Skylla
* Piwie
By Anunaki
* Pancho, Blade_CH
By IHAD
* AstonMartin_DBS
By Dream Elite
* Satrunner, mr.strauss ei, WeDoIt
ZitatAlles anzeigen1. Input IP-address
2. Input username and password
3. Press "Check connection"
4. On "Check picon path"
5. Then on "continue"
- If there is no error the next windows will be opened
6. From there the channel list & picons (if the picons are existing) will be loaded from the box
7. On the right hand side the picon folder can be selected where the local picons are stored
8. Select the desired bouquets (set the checkmarks) & press "Load channel list"
9. Now the picons could be copied/replaced from the directories to the picon folder on the receiver
- Therefore mark the channel names to see the picons
- With set the checkmarks and the button „<“the picons could be copied from the left hand side to the right hand side.
- If in the marked picon folder no picon is available, an alternative picon will automatically searched
10. With the top button the picons can be copied from the left hand side to the receiver
Additional functions are in the menu
Extras ->
-> E² Check filename
- Here will be the names of the picons approved and if necessary corrected
-> Mount manager
- With this function it is possible to mount an external device for the picons to be able to copy them to there
-> Picon manager ->
1. Delete all
- All picons will be deleted from the receiver and from the computer directory (\config\picon_from_receiver)
2. Delete selected
- The selected picons will be deleted from the receiver and from the computer directory (\config\picon_from_receiver
3. Show all
- An overview of the whole picons packet on the receiver
4. Upload selected
- Whole bouquets but also individual picons can be copied to the receiver
5. Show missing
- This will compare the picons from the receiver with the channel list and show you the missing picons on your receiver
Converter ->
-> Name converter
- Due to other name convention for cable provider this functions will convert your picons that they are be displayed correctly
-> E² to Spark
- This function converts E2 picons to Spark receiver picons. This function "Picon-E²-Spark-Converter" will follow later.
