Es funktioniert nicht mit 2 x CI + Version 1.3 Smit CAM und Dansk Boxer Abonnements. Wird es sein?
Wird es möglich sein, 2 x CI + CAM zu verwenden?
-
-
ciplushelper ist installiert und aktuell?
Jede CAM für sich funktionert?
Dann bitte noch jedem CAM genau die Sender des jeweiligen Abos einzeln zuordnen.Und lege dir bitte eine sinnvolle Signatur zu...
Damit wären wir mal wieder beim beliebten Thema. Für Supportanfragen auch oft hilfreich:
Für Supportanfragen deine Signatur mit brauchbaren Supportinfos befüllen (Box{en}, Empfang, Image, Netzwerk, weitere Hardware, etc...). Bei den SE_Plus und UE_Plus bitte wegen der Flashgröße auch die Hardware Revision V1 oder V2 dazuschreiben. Und nicht Quad, Quad 4K und Quad_Plus verwechseln. -
Hey Papi2000
CIhelper 4.2 and 4.4 testet.
Not better then pure OpenATV 6.2Yes both CAM is workin just fine.
No need for restart or intitalize.I have tried to set one Caid for each 500 and 502 is possible.
And also non caid.
And both for each CAM.
Also select the channels that are codet.
All channels for both CAM.
And half for each CAM.When I start recording, all the other channels go blank.
It go to tuner J ok.
But screen is black.Can it be because I use two card from the same provider.
Is it possible to lock one CAM to each tuner I and J ?
So the box works like two seperat boxes ?
It seems like both CAM like to do the job.Yours
Poul -
No provider, and no CAID.
Just put 1 service to one modul, onother suitable service for the other modul - nothing else.
Then in the channel list Menue- set "CI Zuweisung beachten auf Ja" - don't know the right english text versions...
Restart the box. These two, and only these two services may now work.
Do not put one service to both modules. That will never work. -
It is not working.
In Danish " Multi kanal support" yes to.
But auto is not better.
I have tried 2 channels with same MUX and 2 with different MUX.
And of cause restarted after change.
I have tried half service to one CAM and the other half to the other.
Under recording setting. I have used auto, expert and experimental mode.
And limited tuners to I and J.
Some time I can record one coded channel and see one.
But nit see all coded channels, some go black.
Some time the free channels go black.It work just fine with one CAM and then give that cam the services that are codet.
-
In Danish " Multi kanal support" yes to.
That depends on the receivers system, and in Enigma2 it will never work. Set it to "No".
I have tried 2 channels with same MUX and 2 with different MUX.
Is one of these channels set to module1, and the other to module 2? Otherwhise it will fail.
And again: In Enigma2 one CI+ module can descramble one service. Only scrambled services have to be sorted and applied to one module. the same service never to a second module.Let me explain easier:
applied to module1:
Service1
Service2
Service3applied to module2:
Service4
Service5
Service6Recording Service1 is using module1, and blocking Service2 and Service3.
You may now watch or record Service4 parallel, blocking also Service5 and Service6.
That's it.
Never apply Service1 also to module2.There is afaik one competitor in the market, which has implemented an automatic dynamic relationship of scrambled services and multimodules in their closed Enigma2. This does only work with their Images. And it's not VU.
-
Hi Papi2000
It is working.
But not well.
The box say conflict too often.
And all channels in the list go grey when recording from one channel.
There is a long way home whit 2 CI+.
But then you are still in front